|
LT6 COMM/NAV
LA6 COMM/NAV
PRICES
 LT-6 COMM/NAV Test Panel
Click on picture for full size view.
The LT-6 Panel aids in the bench testing
of VHF Communication and Communication/Navigation equipment. A vast improvement
over the old LT-5 Panel. The LT6 Panel has added the ability to use serial
control heads, navigation indicators, a speaker on the panel for speaker or
phone channels, mike testing, use of the LA cable series harnesses, digital
panel meter, and 56 test point jacks. Its almost like owning a LT5 , LA-6, headset tester and more!
The serial control heads of the unit under test can be connected by optional
control head cables to the DC-37 Control Buss connection (P4) on the panel face.
This connection is documented in detail later in this manual and with this
information the customer can custom make cabling to connect their buss
simulators to the panel in place of the serial control head. This added feature
provides the ability to check those serial controlled 8.33MHz units.
The LT 6 Panel provides for the connection of navigation indicators for use
with those Comm/Nav units with navigation outputs. The cables for the Navigation
indicators are the same as those used by the LV 6 test panel, there by reducing
the number of cables needed in a shop’s inventory. Also, the LT 6 panel can
provide the loads and metering of the navigation outputs with or without an
indicator connected. This is why the new LT 6 harness series replaces many of
the old LA series harnesses where multiple connectors are used for indicators
and do not provide for metering or test point jacks.
With the addition of a panel speaker on the LT 6 Panel, the panel allows
monitoring of either the speaker channel output or phones/intercom/aux audio
outputs. These output RMS voltages are metered by the panel mounted digital
meter.
Pilot Headset testing is provided on the LT 6 Panel for checking mike and
headphone operation. This popular feature was carried over and improved from the
LA 6 Panel. Provides a fast GO/NO-GO check of the pilot’s headset.
There are many of the old LA harness series cable out there, so a LA cable
connector is include on the LT 6, so customers can continue to use them. However, it is suggested that you check out the new version of the LT 6 harness
for the unit you are testing because many have much improved testing abilities.
A digital panel meter with meter switch allow for monitoring the following:
DC Volt, Tx/Rx Amp, IND Amp, Speaker output, Comm phone output, Aux Audio output,
Nav Flag, Nav Dev, GS Flag, GS Dev and TO-FROM Flag. Also included to aid
metering are Deviation and Flag load switches providing from 0 to 5 1000-ohm
loads.
The LT 6 panel has 56 test point Jacks to monitor varies signals.
The LT 6 has a cabinet back and can be rack mounted or used as stand-alone.
The Panel is 7 inches high, 19 inches wide and 5.25 inches deep. The standard
color is Precision Tan with Brown knobs and Brown lettering.
The LT-6 does not come with a control head. If one is needed it must be
ordered separately.
LA-6 Lightweight Avionics Test Panel
Click on picture
for an enlarged picture map.
The LinAire LA-6 Light Com/NAV Test Panel is engineered
to handle the popular lightweight panel mounted avionics systems that are on the
market today and adaptable to future models. The unit is a low
profile (7 inches high) improved version of our dependable old LA-5 that has
served the aviation community since 1966.
A Headphone amplifier has been added to eliminate the need
for headphones when checking headphone or sidetone audio. This is a
selectable function, either amplified to the panel speaker or normal phones
operation selected by toggle switch.
The panel has a improved microphone test circuit for checking
pilot microphones.
The voltage and current is monitored by 4 inch
analog meters.
The panel comes enclosed in it's own cabinet back
and allows for standard rack mounting or stand alone use.
| Description |
SKU # |
Price |
| LA-6 |
01001 |
CALL |
| LT-6 |
06001 |
CALL |
back to Top
| 
