|
CONTACT
|
LA-6 DetailsThe following list the panel functions and controls:
METERING Current Meter 0 - 15 Amps DC SPEAKER The Panel Speaker (5 watt 8 ohm) or a 4 ohm internal load is selectable by toggle switch. Also provided for is an external speaker or watt meter connection at the external speaker output jack. MICROPHONE A Microphone jack is provided for mike audio input and can be switched to a MIKE TEST circuit to test the microphone. Also provided is a microphone key switch for keying the transmitter without a mike. HEADPHONE A headphone channel amplifier can be selected by toggle switch for headphone audio at the panel's speaker. A PHONE jack is provided for connection of a external headphone or watt meter. SWITCHED POWER OUTPUT Two banana jacks are provided for a switched and metered power output from the panel face. DC POWER INPUT A rear panel terminal strip provides for connecting an external DC power supply. DC power on the panel is fused and controlled by an ON/OFF power switch and is monitored by the panel meters. The panel has a power indicator lamp. PANEL HARNESS CONNECTOR The panel connector is a durable and inexpensive 8 pin female connector. PANEL SIZE & FINISH The LA6 is a cabinet enclosed unit measuring 7 inches high, 19 inches wide and 5.25 inches deep. It can be used stand alone or rack mounted. The panel finish is an epoxy based LinAire Tan with Dark Brown lettering.
LA HARNESSES:COM UNITS COM/NAV UNITS NAVIGATION UNITS NAV INDICATORSADF RECEIVERS AUDIO AMP / MARKER UNITS |
Avionics Test Equipment Panels and Cables for
bench testing of Aircraft Radio, Navigation, Audio Controllers, Radar and more.
Linaire Engineering Inc.
|